Customization: | Available |
---|---|
After-sales Service: | Oline |
Warranty: | 3 Years |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model | Kalerbei-6004KA | Kalerbei-6007KA | Kalerbei-6009KA |
Profile Cutting Size | Profile Length≤6500mm, Φ5mm≤Round Pipe Diameter≤φ40mm, 5 mm≤Rectangular Tube And Square Tube Diagonal≤40mm | Profile Length≤6500mm, Φ5mm≤Round Pipe Diameter≤φ68mm, 5mm≤Rectangular Tube And Square Tube Diagonal≤68mm | Profile Length≤6500mm, Φ5mm≤Round Pipe Diameter≤φ90mm, 5mm≤Rectangular Tube And Square Tube Diagonal≤90mm |
Automatic Feeding Profile Size | Profile Length≤6500mm, Φ5mm≤Round Pipe Diameter≤φ40mm, 5mm≤Rectangular Tube And Square Tube Diagonal≤40mm | Profile Length≤6500mm, Φ5mm≤Round Pipe Diameter≤φ68mm, 5mm≤Rectangular Tube And Square Tube Diagonal≤68mm | Profile Length≤6500mm, Φ5mm≤Round Pipe Diameter≤φ68mm, 5mm≤Rectangular Tube And Square Tube Diagonal≤68mm |
Single Pipe Weight | ≤50Kg | ≤80Kg | ≤100Kg |
X Axis Travel | 150 mm | 150 mm | 150 mm |
ZAxis Travel | 150 mm | 150 mm | 150 mm |
Tail Material | 50mm | 50mm | 50mm |
X/Y/Z Axis Positioning Accuracy | ±0.05mm/m | ||
X/Y/Z Axis Repositioning Accuracy | ±0.03mm/m | ||
Y Axis Max Acceleration Speed | 1.5G | ||
Y Axis Max Speed | 85 m/min | ||
Max Rotating Speed of Chucks | 150r/min |
1. Fast speed and high efficiency
The acceleration reaches 1.6G, and the efficiency is 5~6 times that of ordinary pipe cutting machines;
2. Wide cutting range, easy to operate:
This machine can cut for many types of pipes: round tubes, square tubes, elliptical tubes and other multi-process cutting. Cutting pipe diameter range round pipe Φ10-86mm,
Square tube diagonal≤ 82mm. Structurally stable; The electronic control original adopts imported accessories and supports 24-hour operation. Industry-specific operating system,Deep optimization, fast response, simplified operation. The perfect combination of speed, function and stability.
3. Small tailing blind zone, saving materials and reducing the post-process:
The normal cutting tail of the equipment is about 40mm, which greatly saves material loss.
4. Follow-up cutting:
The standard height adjuster makes it easy to handle deformed pipes.
5. Automatic identification of head and tail material:
The head and tail material are automatically separated from the finished part, reducing the manual sorting process
1.Q: Are you a factory or trader ?
A: We are a ten -year manufacture experience factory.